C9115AXI-F Specification
|
| Description |
Cisco Catalyst 9115AX Series, F Domain |
| Software |
• Cisco Unified Wireless Network Software Release 8.9 or later
• Cisco IOS® XE Software Release 16.11or later |
| Supported wireless LAN controllers |
• Cisco Catalyst 9800 Series Wireless Controllers
• Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities |
• 4×4 MIMO with four spatial streams
• Maximal Ratio Combining (MRC)
• 802.11n and 802.11a/g beamforming
• 20- and 40-MHz channels
• PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• 802.11 Dynamic Frequency Selection (DFS)
• Cyclic Shift Diversity (CSD) support |
| 802.11ac |
• 4×4 downlink MU-MIMO with four spatial streams
• MRC
• 802.11ac beamforming
• 20-, 40-, 80-, and 160-MHz channels
• PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• 802.11 DFS
• CSD support |
| 802.11ax |
• 4×4 downlink MU-MIMO with four spatial streams
• Uplink/downlink OFDMA
• TWT
• BSS coloring
• MRC
• 802.11ax beamforming
• 20-, 40-, 80-, and 160-MHz channels
• PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• 802.11 DFS
• CSD support |
| Integrated antenna |
• 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth
• 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
| External antenna (sold separately) |
• Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
• Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
| Interfaces |
• 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
• Management console port (RJ-45)
• USB 2.0 (enabled via future software) |
| Indicators |
• Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) |
• Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
| Input power requirements |
• 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOE ®)
• Cisco power injector, AIR-PWRINJ6=
• 802.3af PoE
• Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af)
Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. |
| Environmental |
Cisco Catalyst 9115AXI
• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
• Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
• Operating temperature: 32° to 122°F (0° to 50°C)
• Operating humidity: 10% to 90% (noncondensing)
• Operating altitude test: 40˚C, 9843 ft.
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 4×4 to 2×2 on both the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled.
Cisco Catalyst 9115AXE
• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
• Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
• Operating temperature: -4° to 122°F (-20° to 50°C)
• Operating humidity: 10% to 90% (noncondensing)
• Operating altitude test: 40˚C, 9843 ft. |
| System memory |
• 2048 MB DRAM
• 1024 MB flash |
| Available transmit power settings |
2.4 GHz
• 23 dBm (200 mW)
• 20 dBm (100 mW)
• 17 dBm (50 mW)
• 14 dBm (25 mW)
• 11 dBm (12.5 mW)
• 8 dBm (6.25 mW)
• 5 dBm (3.13 mW)
• 2 dBm (1.56 mW)
• -1 dBm (0.79 mW)
• -4 dBm (0.39 mW)
5 GHz
• 26 dBm (400 mW)
• 23 dBm (200 mW)
• 20 dBm (100 mW)
• 17 dBm (50 mW)
• 14 dBm (25 mW)
• 11 dBm (12.5 mW)
• 8 dBm (6.25 mW)
• 5 dBm (3.13 mW)
• 2 dBm (1.56 mW)
• -1 dBm (0.79 mW)
• -4 dBm (0.39 mW) |
| Frequency band and 20-MHz operating channels |
F regulatory domain:
• 2.412 to 2.472 GHz; 13 channels
• 5.250 to 5.350 GHz; 4 channels
• 5.725 to 5.825 GHz; 4 channels |
Reviews
There are no reviews yet.